LNNano - Brazilian Nanotechnology National Laboratory

Publications

Print this pageShare on FacebookTweet about this on TwitterEmail this to someoneShare on LinkedIn

 

Full articles published in periodicals

2017

ARAUJO, J.A.; SOUZA, R.M.; LIMA, N.B.; TSCHIPTSCHIN, A.P. Thick CrN/NbN multilayer coating deposited by cathodic arc technique. Materials Research, v. 20, n. 1, p. 200-209, 2017. http://dx.doi.org/10.1590/1980-5373-MR-2016-0293

RODRIGUEZ, J., RAMIREZ, A.J. Microstructural Evolution During Friction Stir Welding of Mild Steel and Ni-Based Alloy 625. Metallurgical and Materials Transactions A, v. 48, n. 3, p. 1092-1102, 2017. http://dx.doi.org/10.1007/s11661-016-3925-5

2016

ARAUJO, J. A., ARAUJO, G. M., SOUZA, R. M., TSCHIPTSCHIN, A. P. – Effect of periodicity on hardness and scratch resistance of CrN/NbN nanoscale multilayer coating deposited by cathodic arc technique – Wear, v. 330-331, p. 469-477, 2016.

ARAUJO, J.A.; GIORJAO, R.A.R.; BETTINI, J.; SOUZA, R.M.; TSCHIPTSCHIN, A.P. Modeling intrinsic residual stresses built-up during growth of nanostructured multilayer NbN/CrN coatings. Surface & Coatings Technology, v. 308, pp. 264–272, 2016.

ARIZA, E. A.; A. S. NISHIKAWA; H. GOLDENSTEIN; A.P. TSCHIPTSCHIN – Characterization and methodology for calculating the mechanical properties of a TRIP-steel submitted to hot stamping and quenching and partitioning (Q&P) – Materials Science and Engineering A, v. 671, p. 54-69, 2016.

AVILA, J. A. et al. Assessment of Ductile-to-Brittle Transition Behavior of Localized Microstructural Regions in a Friction-Stir Welded X80 Pipeline Steel with Miniaturized Charpy V-Notch Testing. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, v. 47, n. 6, p. 2855–2865, 2016.

AVILA, J.A. ; RODRIGUEZ, J. ; MEI, P.R. ; RAMIREZ, A.J. Microstructure and fracture toughness of multipass friction stir welded joints of API-5L-X80 steel plates – Materials Science and Engineering A, v. 673, p. 257-265, 2016. DOI: 10.1016/j.msea.2016.07.045.

BUZOLIN, R.H.; FRANCISCO, B.R.; SILVA, E.P.; PEREIRA, V.F.; RAMIREZ, A.J.; MALUF, O.; PINTO, H.C. Dissimilar Friction Stir Welding of HSLA Steel to Austenitic High-Mn TRIP Steel. Materials Science Forum, vol. 879, pp. 2306-2311.

FONSECA, E.B. ; SANTOS, T.F.A. ; BUTTON, S.T. ; RAMIREZ, A.J. Physical Simulation of a Duplex Stainless Steel Friction Stir Welding by the Numerical and Experimental Analysis of Hot Torsion Tests. Mettalurgical and Materials Transactions A, p. 47, pp. 4543-4552, 2016.

HOYOS, J. J. et al. Effect of friction stir welding on hydrogen content of ISO 3183 X80M steel. Journal of Manufacturing Processes, v. 22, p. 82–89, 2016.

HOYOS, J.J.; MARI, D. Comment on -Origin of low-temperature shoulder internal friction peak of Snoek-Köster peak in a medium carbon high alloyed steel- by Lu et al. [Solid State Communications 195 (2014) 31]. Solid State Communications , v. 226, p. 51-53, 2016.

SANTOS, T.F.A. ; TORRES, E.A. ; FONSECA, E.B. ; RAMIREZ, A.J. Friction stir welding of duplex and superduplex stainless steels and some aspects of microstructural characterization and mechanical performance. Mat. Res. [online]. 2016, vol.19, n.1, pp.117-131.

2015

AVILA, J. A. D. et al. Fracture toughness assessment at different temperatures and regions within a friction stirred API 5L X80 steel welded plates. Engineering Fracture Mechanics, v. 147, p. 176–186, 2015.

FARNEZE, H.N.; TAVARES, S.S.M.; PARDAL, J.M.; RAMIREZ, A.J.; PEREIRA, V.F.; BARBOSA, C. Effects of Thermal Aging on Microstructure and Corrosion Resistance of AISI 317L Steel Weld Metal in the FSW Process. Materials Research, v. 18, p. 98-103, 2015.

MAYA-JOHNSON, S. et al. Effect of the Number of Welding Repairs with GTAW on the Mechanical Behavior of AA7020 Aluminum Alloy Welded Joints. Metallurgical and Materials Transactions B, v. 46, n. 5, p. 2332–2339, 2015.

MAYA-JOHNSON, S.; RAMIREZ, A. J.; TORO, A. Fatigue crack growth rate of two pearlitic rail steels. Engineering Fracture Mechanics, v. 138, p. 63–72, 2015.

RODRIGUEZ, J.; RAMIREZ, A. J. Microstructural characterisation of friction stir welding joints of mild steel to Ni-based alloy 625. Materials Characterization, v. 110, p. 126–135, 2015.

SMITH, R. T.; LOLLA, T.; GRANDY, L.; FARIA, G. RAMIREZ, A.J. BABU, S.S.; ANDERSON, P.M. In situ X-ray diffraction analysis of strain-induced transformations in Fe- and Co-base hardfacing alloys. Scripta Materialia, v. 98, p. 60–63, 2015.

SOWARDS, J. W. et al. Characterization of mechanical properties, fatigue-crack propagation, and residual stresses in a microalloyed pipeline-steel friction-stir weld. Materials and Design, v. 88, p. 632–642, 2015.

THEODORO, M.C. ; PEREIRA, V.F. ; MEI, P.R. ; RAMIREZ, A.J. Dissimilar Friction Stir Welding Between UNS S31603 Austenitic Stainless Steel and UNS S32750 Superduplex Stainless Steel. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, v. 46, p. 1440-1447, 2015.

2014

MAGNANI, M. ; TERADA, M. ; LINO, A.O. ; TALLO, V.P. ; FONSECA, E.B.; SANTOS, T.F.A. ; RAMIREZ, A.J. Microstructural and Electrochemical Characterization of Friction Stir Welded Duplex Stainless Steels. International Journal of Electrochemical Science, v. 9, p. 2966–2977, 2014.

RODRIGUEZ, J. F.; RAMIREZ,  A. J. Friction stir welding of mild steel to alloy 625 – development of welding parameters. Science and Technology of Welding and Joining, v. 1718, n. March, p. 1362171814Y.000, 2014.

SANTOS, T.F.A.; IDAGAWA, H.S.; RAMIREZ, A.J. Thermal history in UNS S32205 duplex stainless steel friction stir welds. Science and Technology of Welding and Joining, vol. 19, n. 2, pp. 150-156, 2014.

SILVA, E.P. et al. Microstructure and Residual Stress Formation during Friction-Stir Welding of Semi-Solid Cast ZK60-RE Magnesium Alloy. Advanced Materials Research, v. 922, p. 688-693, 2014.

2013

ESCOBAR, J. D. et al. Improvement of cavitation erosion resistance of a duplex stainless steel through friction stir processing (FSP). Wear, v. 297, n. 1-2, p. 998–1005, 2013.

SANTOS, T. F. A; IDAGAWA, H. S.; RAMIREZ,  A J. Thermal history in UNS S32205 duplex stainless steel friction stir welds. Science and Technology of Welding & Joining, v. 19, n. 2, p. 150–156, 2013.

SANTOS, T.F.A.; MARINHO, R.R.; PAES, M.T.P.; RAMIREZ, A.J. Microstructure evaluation of UNS S32205 duplex stainless steel friction stir welds. REM: R. Esc. Minas, v. 66(2), pp. 187-191, 2013.

Until 2010

SANTOS, T. F. et al. Fracture toughness of ISO 3183 X80M (API 5L X80) steel friction stir welds. Engineering Fracture Mechanics, v. 77, n. 15, p. 2937–2945, 2010.

GARZÓN, C. M.; RAMIREZ, A. J. Growth kinetics of secondary austenite in the welding microstructure of a UNS S32304 duplex stainless steel. Acta Materialia, v. 54, n. 12, p. 3321–3331, 2006.

RAMIREZ, A. J.; LIPPOLD, J. C. High temperature behavior of Ni-base weld metal Part I. Ductility and microstructural characterization. Materials Science and Engineering A, v. 380, n. 1, p. 259–271, 2004a.

RAMIREZ, A. J.; LIPPOLD, J. C. High temperature behavior of Ni-base weld metal Part II – Insight into the mechanism for ductility dip cracking. Materials Science and Engineering A, v. 380, n. 1, p. 245–258, 2004.

 

Book chapters

2014

FARIA, G.A. Exploring Metallic Materials Behavior Through In Situ Crystallographic Studies By Synchrotron Radiation. [s.l.] Universidade Estadual de Campinas, 2014.

 

Complete works and extended abstracts published in conferences

2016

ESCOBAR, J. D. et al. Compositional Analysis of the Retained Austenite in a Ti-Stabilized Supermartensitic Stainless Steel. Proceedings of the Atom Probe Tomography and Microscopy, APT&M 2016, p.211, 2016.

PEREIRA, V. P.; LOPES, E.S.N. Soldagem por Atrito com Pino Não Consumível de Juntas Dissimilares Ti6Al4V-Al6063 – 22° Com   gresso Brasileiro de Engenharia e Ciência dos Materiais, Natal, RN, Brasil, 2016.

RODRIGUEZ, J.; PEREIRA, V.F.; TSCHIPTSCHIN, A.P.; GARCIA, D.; KALUME, R.; LIMA, L. Friction stir welding of 9%Ni steel pipe. ASM Proceedings of the International Conference: Trends in Welding Research, pp. 469-472, 2016.

TSCHIPTSCHIN, A.P., PINEDO, C. E.; NISHIKAWA; A.S. VARELA, L.B. – Thermal Stability of Expanded Austenite in a 316L Austenitic Stainless Steel – 4th ASM – International Symposium of Surface Hardening of Corrosion Resistant – Alloys, Valetta, Malta, June 2016.

TSCHIPTSCHIN, A.P., ARAUJO, J.A., BETINI, J.; GIORJÃO, R. A., SOUZA, R.M. – Modeling intrinsic residual stresses built-up during growth of nanostructured multilayer NbN/CrN coatings – 43rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, CA, April 2016.

2015

AVILA, J. A. D. et al. Miniaturized Charpy impact toughness assessment of a friction stir welded bead-on-plate API-5L-X80 steel. (IK4-Lortek, Ed.). The 4th international conference on scientific and technical advances on friction stir welding and processing. Anais…San Sebastian, Spain: 2015

BURGOS, A. ; HOYOS, J.J. ; SURIAN, E. ; SVOVODA, H. Influencia del PWHT de solubilizado sobre las propiedades mecánicas a elevadas temperaturas de depósitos de soldadura de aceros 9Cr. In: CONAMET/SAM 2015 15° Congreso Internacional De Metalurgia Y Materiales, 2015, Concepción, Chile. CONAMET/SAM 2015 15° Congreso Internacional De Metalurgia y Materiales, 2015.

COSTA, A. M. S et al. Microstructural and Physical Characterization of Co-based Superalloy. In: Brazilian MRS meeting, 2015, Rio de Janeiro. XIV Brazilian MRS meeting, 2015.

COSTA, A. M. S et al. Development of Co-based Superalloy. In: MS&T15 Meeting, Columbus – OH – USA, Oct. 4 – 8, 2015.

ESCOBAR, J.D. et. al. In-situ study of austenite reversion kinetics during intercritical tempering of a 12Cr-6Ni-2Mo supermartensitic stainless steel. Proceeding of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p.1127, 2015.

ESCOBAR, J. D. et al. In-situ study of austenite reversion kinetics during intercritical tempering of a 12Cr-6Ni-2Mo supermartensitic stainless steel. (M. Militzer et al., Eds.)Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Anais…2015

FONSECA, E.B. ; PEREIRA, V.F. ; TERADA, M. ; CARVALHO, L.P. ; RAMIREZ, A.J. Effect of misalignments on friction stir welding of steel. (IK4-Lortek, Ed.). The 4th international conference on scientific and technical advances on friction stir welding and processing. Anais…San Sebastian, Spain: 2015.

HOYOS, J.J.; RODRIGUEZ, J. ; CRAIDY, P. ; PIZA, M. T. ; RAMIREZ, A. J. . Influence of hydrogen and austenization on the martensite start strain in the austenitic stainless steel 316. In: XXII Brazilian Crystallographic Association (ABCr) Meeting and I Latin American Crystallographic Association (LACA) Meeting, 2015, São Paulo. XXII Brazilian Crystallographic Association (ABCr) Meeting and I Latin American Crystallographic Association (LACA) Meeting, 2015.

HOYOS, J.J.; RODRIGUEZ, J. ; CRAIDY, P. ; PIZA, M. T. ; RAMIREZ, A. J. . XIV Brazilian MRS Meeting. In: XIV Brazilian MRS Meeting, 2015, Rio de Janeiro. XIV Brazilian MRS Meeting, 2015.

SANTOS, T.F.A. ; FONSECA, E.B. ; TORRES, E.A. ; RAMIREZ, A.J. Soldagem por atrito com pino não consumível de aços inoxidáveis duplex. XLI CONSOLDA – Congresso Nacional de Soldagem. Anais…Salvador, Brasil: 2015.

2014

AVILA, J. A. D. et al. Fracture mechanics evaluation of FSW welded plates of API X80 steel. SEM Annual Conference & Exposition on Experimental and Applied Mechanics. Anais…Greenville, USA: 2014.

AVILA, J. A.; RUCHERT, C. O. F. T.; MEI, P. R.; et al. Fracture toughness of multipass friction stir welded API 5L X80 pipeline steel. 10th International Friction Stir Welding Symposium. Anais… . p.xx, 2014. Beijing, China.

AYUSSO, V. H. ; TERADA, M. ; PEREIRA, V. F. ; TOMACHUK, C. R. ; ROSSI, J. L. ; RAMIREZ, A. J. ; COSTA, I. . Estudo da Resistência à Corrosão do Aço Inoxidável Lean Duplex UNS 32304 Soldado Por Atrito Com Pino não Consumível. In: 21 Congresso Brasileiro de Ciência e Engenharia de Materiais, 2014, Cuiabá. 21 Congresso Brasileiro de Ciência e Engenharia de Materiais, 2014.

AYUSSO, V. H. ; TERADA, M. ; PEREIRA, V. F. ; TOMACHUK, C. R. ; ROSSI, J. L. ; RAMIREZ, A. J. ; COSTA, Isolda . Caracterização Microestrutural e Eletroquímica do Aço inoxidável lean duplex UNS32304 soldado pelo método FSW (Friction Stir Welded). In: Xlll Encontro da Sociedade Brasileira de Pesquisa em Materiais, 2014, João Pessoa. Xlll Encontro da Sociedade Brasileira de Pesquisa em Materiais, 2014.

2013

AVILA, J.; RUCHERT, C.O.F.T.; MEI, P.R.; MARINHO, R. R.; PAES, M. T. P.; RAMIREZ, A. J. Fracture toughness of multipass friction stir welded. 10th International Friction Stir Welding Symposium. Anais…Beijing: TWI, 2013.

AVILA, J. A. D.; RUCHERT, C. O. F. T.; MEI, P. R.; RAMIREZ, A.J. Fracture toughness evaluation of friction stir welded API 5L X-80 steel plates. Rio Pipeline. Anais…Rio de Janeiro: 2013.

CARVALHO, L.P. ; F., A. F. ; PEREIRA, V. F. ; SUGAHARA, T. ; TERADA, M. ; RAMIREZ, A.J. . Evaluation of Friction Stir Welding for Onshore Pipelines. In: Rio Pipeline 2013, 2013, Rio de Janeiro. Rio Pipeline 2013, 2013.

ESCOBAR, J.D.; MEI, P. R.; RAMIREZ, A. J. Insight into the microstructure of FSW Ti-stabilized supermartensitic stainless steel. Proceedings Stainless Steel World Conference, Paper PS13068, 2013.

ESCOBAR, J.D.; FARIA, G.; WU, L.; MEI, P. R.; RAMIREZ, A. J. In-situ study of reverted austenite and TRIP effect of a 0.13Ti and 0.038V Supermartensitic Stainless Steel.  Proceedings Stainless Steel World Conference, Paper PS13069, 2013.

FONSECA, E. B. et al. Microstructural simulation of friction stir welding in UNS S32205 duplex stainless steel. ASM Proceedings of the International Conference: Trends in Welding Research, p. 297–301, 2013.

FONSECA, E. B. ; SANTOS, T. F. A. ; BUTTON, S. T. ; RAMIREZ, A. J. Microstructural Characterization of Simulated Friction Stir Welded UNS S32205 Duplex Stainless Steel. In: Proceedings of the Twenty-third (2013) International Offshore and Polar Engineering, 2013, Anchorage, EUA. p. 202-206.

IDAGAWA, H. S.; TORRES, E. A.; RAMIREZ, A. J. CFD modeling of dissimilar aluminum-steel friction stir welds. ASM Proceedings of the International Conference: Trends in Welding Research. Anais…Chicago: ASM International, 2013.

PEREIRA, V. F.; SUGAHARA, T.; CARVALHO, L.P.; MARINHO, R.R.; TERADA, M.; RAMIREZ, A.J. Uso do processamento por atrito com pino não consumível para reparo de defeitos de soldagem em aços api x70. In: 68º Congresso Anual da ABM – Internacional, 2013, Belo Horizonte. Anais …, 2013. p. 876-885.

RAMIREZ, A. J. et al. Friction stir welding of steels for the oil and gas industry. The 1st International Joint Symposium on Joining and Welding, At Osaka. Anais…Osaka, Japan: 2013.

RODRIGUEZ, J.; RAMIREZ, A. J. Dissimilar Friction Stir Welding of Steel to Ni-based Alloy 625 – Butt and Lap Joints. In: Proceedings of the Twenty-third (2013) International Offshore and Polar Engineering, 2013, Anchorage, EUA. p. 202-206.

SANTOS, T. F. et al. Microstructure evaluation of UNS S32205 duplex stainless steel friction stir welds. INOX 2010- 10th Brazilian Stainless Steel Conference. Anais…2013

TERADA, M. . et al. Microstructural characterization of underwater friction stir welded API X80 steel. ASM Proceedings of the International Conference: Trends in Welding Research. Anais…Chicago: ASM International, 2013.

TORRES, E. A. . B C; RAMIREZ, A. J. . B. Relationship between FSW parameters and intermetallic compounds formation in dissimilar aluminum-steel butt joints. ASM Proceedings of the International Conference: Trends in Welding Research. Anais…Chicago: ASM International, 2013.

VELÁSQUEZ, E. et al. Cavitation erosion resistance improvement of a Multipass Friction Stir Processed UNS S32205 Duplex Stainless Steel. Trends in Welding Research, 9th International Conference. Anais…Chicago: ASM International, 2013.

WU, L.; FARIA, G. A. ; ALONSO, T. C. ; RAMIREZ, A.J. XTMS – X-Ray Scattering and Thermo-Mechanical Simulation Experimental Station, in RAU 2013, 2013.

2012

BUZOLIN, R. H. ; MENDONCA, R. R. ; PEREIRA, V. F. ; SILVA, E. P. ; MALUF, O. ; RAMIREZ, A. J. ; PINTO, H. C. Effect of the tool offset on the friction stir weldability of dissimilar joints between high-Mn trip and HSLA steel grades.. In: 20º CBECIMAT, 2012, Joinvilie. Anais do 20º CBECIMAT, 2012.

ESCOBAR, J.D.; MEI, P. R.; RAMIREZ, A. J. The Effect of Heat Treating and Friction Stir Processing on the Retained Austenite of a 0.13Ti and 0.038V Supermartensitic Stainless Steel, 2012. In: In: Oral, XI Encontro do SBPMat, 2012, Florianópolis.

FARIA, G.; WU, L.; TERADA, M.; SANTOLIN, D.; ALONSO, T.; RAMIREZ, A.J. Time resolved analysis of ferrite decomposition and second phase formation in UNS S32205 duplex stainless steels. In SBPMat. 2012.

FARIA, G.; WU, L.; SANTOLIN, D.; ESCOBAR, J.D.; ALONSO, T.; BERNARDI, H.H.; OTUBO, J.; RAMIREZ, A.J. In situ Thermo-Mechanical Study of Shape Memory Stainless Steels. In Visual-JW2012-Workshop on in situ studies on photons neutrons and electrons, Osaka, Japão, 2012.

FARIA, G.; WU, L.; SANTOLIN, D.; ALONSO, T.; TERADA, M.; RAMIREZ, A.J. Stress Effect On The Kinetics Of Intermetallic Phase Precipitation On UNS S32205 Duplex Stainless Steel.  In Visual-JW2012-Workshop on in situ studies on photons neutrons and electrons. Osaka, Japão, 2012.

FONSECA, E. B. ; SANTOS, T. F. A. ; BUTTON, S. T. ; RAMIREZ, A. J. . Microstructural Simulation of Friction Stir Welding in UNS S32205 Duplex Stainless Steel. In: 9th International Trends in Welding Research Conference, 2012, Chicago. Proceedings of the 9th International Conference Trends in Welding Research, 2012. p. 297-301.

FONSECA, E. B. ; SANTOS, T. F. A. ; BUTTON, S. T. ; RAMIREZ, A. J. Simulação microestrutural da soldagem por atrito com pino não consumível do aço inoxidável duplex UNS S32205. In: XI Seminário Brasileiro do Aço Inoxidável, 2012, São Paulo.

FRANCISCO, B. R. ; BUZOLIN, R. H. ; MENDONCA, R. R. ; FERRINHO, V. ; SILVA, E. P. ; MALUF, O. ; LIMA, E. B. F. ; RAMIREZ, A. J. ; PINTO, H. . Análise da soldabilidade por fricção e mistura mecânica de juntas dissimilares entre aço austenítico alto Mn com efeito TRIP e aço comercial ARBL. 2012. In: Oral, XI Encontro do SBPMat, 2012, Florianópolis.

FRANCISCO, B. ; BUZOLIN, R. H. ; MENDONCA, R. R. ; FERRINHO, V. ; MALUF, O ; LIMA, E. B. F. ; RAMIREZ, A.J. ; PINTO, H. C. Friction Stir Welding of Dissimilar Joints between High-Mn Austenitic TRIP Steel and HSLA Steel. 2012. XI SBPMat.

PEREIRA, V.P.; SUGAHARA, T.; CARVALHO, L.P.; MARINHO, R.R.; TERADA, M.; RAMIREZ, A.J. Uso do Processamento por Atrito com Pino Não Consumível para Reparo de Defeitos de Soldagem em Aços API X70. Congresso da ABM, 2012.

RAMIREZ, A.J. ; FARIA, G. ; WU, L ; ALONSO, T. C. ; ISAAC, A. ; PITON, J. ; NEUENSCHWANDER, RT . Advanced Facility for Parallel Thermo-mechanical Simulation and Synchrotron X-ray Diffraction. In: 2nd International Workshop, 2012, Osaka. Visual-JW2012. Osaka: Joining and Welding Research Institute, Osaka University, Japan, 2012. v. 1. p. 211-212.

RAMIREZ, AJ.; FARIA, G.; ALONSO, T.; WU, L. New research possibilities for the thermo-mechanically induced phase transformations – Brazilian unique facility for parallel physical simulation and synchrotron x-ray diffraction. In SBPMat, Florianópolis, 2012.

TORRES, E.A.; IDAGAWA, H.S.; RAMIREZ, A.J. Efecto de los parámetros de soldadura en la formación de compuestos intermetálicos y su respuesta mecánica en juntas aluminio-acero soldadas por fricción-agitación. Proceeding VII Conferencia Internacional de Ingeniería Mecánica – COMEC, 2012, ISBN 978-959-250-757-9.

 

Master’s and Doctoral Thesis/Dissertations

2016

AVILA, J. A. D. Determinação da tenacidade à fratura de juntas soldadas por atrito com pino não consumível em chapas de aço API-5L-X80. [s.l.] Universidade Estadual de Campinas, 2016.

RODRIGUES, C.R. Avaliação das transformações de fase do aço com 9% de níquel e das zonas termicamente afetadas simuladas in situ com difração de raios-x síncrotron. [s.l.] Universidade Federal Fluminense, 2016.

2014

FARIA, G.A. Exploring Metallic Materials Behavior Through In Situ Crystallographic Studies By Synchrotron Radiation. [s.l.] Universidade Estadual de Campinas, 2014.

2013

ESCOBAR, J. D. Transformações de fase associadas ao processamento termomecânico do aço inoxidável supermartensítico 12Cr/6Ni/2Mo/0,1Ti. [s.l.] Universidade Estadual de Campinas, 2013.

FONSECA, E. B. Simulação física do processo de soldagem por atrito com pino não consumível do aço inoxidável duplex UNS S32205 67. [s.l.] Universidade Estadual de Campinas, 2013.

NASCIMENTO, N. DE M. Avaliação da tenacidade à fratura de juntas soldadas por atrito com pino não consumível em aço inoxidável sepermartensítico. [s.l.] Universidade Estadual de Campinas, 2013.

RODRIGUEZ, J. F. Caracterização microestrutural de juntas de aço ASTM A516 – liga de Ni 625 soldadas por atrito com pino não consumível. [s.l.] Universidade Estadual de Campinas, 2013.

THEODORO, M. C. Soldagem por atrito com pino não-consumível em juntas dissimilares de aços inoxidáveis austenítico UNS S31603 e superduplex UNS S32750. [s.l.] Universidade Estadual de Campinas, 2013.

2012

HERMENEGILDO, T. F. Soldagem por atrito com pino não consumível do aço de alta resistência ISO 3183 X80M. Campinas: Universidade Estadual de Campinas, 2012.

SANTOS, T. F. Avaliação microestrutural e de desempenho de juntas soldadas de aços inoxidáveis duplex por atrito com pino não consumível. [s.l.] Universidade Estadual de Campinas, 2012.

TORRES, E. A. L. Soldagem por atrito com pino não consumível de chapas finas do aço 1020 e da liga de alumínio 6063-T5. [s.l.] Universidade Estadual de Campinas, 2012.